http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/-t1.htm Tue, 20 Oct 2009 00:27:26 GMT 10 http://i296.photobucket.com/albums/mm173/buffalotheatre/cazmanlogo.jpg http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/-t1.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/derlin-rear-lower-ctrl-arm-bushes-s13s14s15-r32r33r34-t6.htm Admin Currently in production are our unique Derlin rear lower control arm bushes. Limited stock due within 4 weeks. These replace the stock worn out factory rubber bushes. The 2 advantages are: Less stiction in your suspension setup, your arms move more freely through their arc. Rubber and Urethane bind up. Stiff. These are stiff, almost as stiff as a rose joint, at leas 95% as stiff, giving next to no deflection. The reason we dont use a spherical bearing in these kits is the dont ... Parts In The Making Or In Development Mon, 12 Oct 2009 04:52:47 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/derlin-rear-lower-ctrl-arm-bushes-s13s14s15-r32r33r34-t6.htm#6 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/derlin-rear-lower-ctrl-arm-bushes-s13s14s15-r32r33r34-t6.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/s14-style-camber-arms-on-the-way-t5.htm Admin Quality on car adjustable camber arms are being produced now. These feature a double curve on the arm for ultra low cars and also to give more clearance to the shock absorber. These use a unique 1" turnbuckle and 38mm Roll Cage steel properly drawn bent. Our standard 5/8" rod end is featured. Limited stock due within 4 weeks. Pictures should be up within 1 week, please post up here if you have any interest in them Predicted price is about $420 a pair RRP. We are trying ... Parts In The Making Or In Development Mon, 12 Oct 2009 04:45:20 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/s14-style-camber-arms-on-the-way-t5.htm#5 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/s14-style-camber-arms-on-the-way-t5.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/bent-s13s14s15-toe-arms-on-the-way-t4.htm Admin For your ultra low S13 chassis' we have had bent toe arms produced. These help clear the subframe and stop traditional straight arms hitting the chassis bolt. These use a unique 1" turnbuckle and 38mm Roll Cage steel properly drawn bent. Our standard 5/8" rod end is featured. Due instock within 4 weeks. Pictures should be up within 1 week, please post up here if you have any interest in them Predicted price is about $410 a pair RRP. We are trying to get this ... Parts In The Making Or In Development Mon, 12 Oct 2009 04:36:27 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/bent-s13s14s15-toe-arms-on-the-way-t4.htm#4 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/bent-s13s14s15-toe-arms-on-the-way-t4.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/who-wants-a-bolt-in-hydro-for-s13-299-t15.htm Admin I have been looking into developing a bolt in hydro that will sit under your stock console for about months now. I finally have 2 test cars to get the specs correct now. I will be developing these regardless, but if I can get some pre orders it will mean I can develop them right now. A rough prediction of $299 should be about right, but prices do vary. This will include the bracket, handle, fasteners, and master cylinder. Kits could be supplied sans master too. I would ... Parts In The Making Or In Development Tue, 20 Oct 2009 00:27:26 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/who-wants-a-bolt-in-hydro-for-s13-299-t15.htm#18 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/who-wants-a-bolt-in-hydro-for-s13-299-t15.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/solid-subframe-risers-for-s13-to-s14-conversion-t14.htm Admin We had always intended to make these, but costs arent cheap. I was disappointed with our preliminary quote, but if there is demand we will produce them. So far cost would be $300 per set, but I will continue to try for better quotes. We will be introducing some new advantages too. The kit will be able to run above or below the subframe. Advantages When run under the frame it raises the subframe by 10mm, correcting the roll center of the car, and giving some better exhaust ... Parts In The Making Or In Development Mon, 19 Oct 2009 23:35:38 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/solid-subframe-risers-for-s13-to-s14-conversion-t14.htm#17 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/solid-subframe-risers-for-s13-to-s14-conversion-t14.htm