http://www.cazmanindustries.com/feed/? Latest topics Tue, 20 Oct 2009 00:27:26 GMT 10 http://i296.photobucket.com/albums/mm173/buffalotheatre/cazmanlogo.jpg http://www.cazmanindustries.com/feed/? http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/jzx90-100-traction-rods-t11.htm cazman JZX90 + JZX100 Traction Rods $245pair RRP For Traction Rods Introductory price $219pair While we try to keep stock of every item, due to popular demand we are often Nil-stock and some items. We have such a little mark-up we cannot afford to stock hundreds of each item, but that is the price you are paying for quality. I would strongly advise emailing us cazman@internode.on.net to check stocks. These are a South Australian built item that have to been made to fill a void ... Suspension Parts For Nissans & Toyotas Tue, 13 Oct 2009 00:01:44 GMT http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/jzx90-100-traction-rods-t11.htm#11 http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/jzx90-100-traction-rods-t11.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/derlin-rear-lower-ctrl-arm-bushes-s13s14s15-r32r33r34-t6.htm Admin Currently in production are our unique Derlin rear lower control arm bushes. Limited stock due within 4 weeks. These replace the stock worn out factory rubber bushes. The 2 advantages are: Less stiction in your suspension setup, your arms move more freely through their arc. Rubber and Urethane bind up. Stiff. These are stiff, almost as stiff as a rose joint, at leas 95% as stiff, giving next to no deflection. The reason we dont use a spherical bearing in these kits is the dont ... Parts In The Making Or In Development Mon, 12 Oct 2009 04:52:47 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/derlin-rear-lower-ctrl-arm-bushes-s13s14s15-r32r33r34-t6.htm#6 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/derlin-rear-lower-ctrl-arm-bushes-s13s14s15-r32r33r34-t6.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/s14-style-camber-arms-on-the-way-t5.htm Admin Quality on car adjustable camber arms are being produced now. These feature a double curve on the arm for ultra low cars and also to give more clearance to the shock absorber. These use a unique 1" turnbuckle and 38mm Roll Cage steel properly drawn bent. Our standard 5/8" rod end is featured. Limited stock due within 4 weeks. Pictures should be up within 1 week, please post up here if you have any interest in them Predicted price is about $420 a pair RRP. We are trying ... Parts In The Making Or In Development Mon, 12 Oct 2009 04:45:20 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/s14-style-camber-arms-on-the-way-t5.htm#5 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/s14-style-camber-arms-on-the-way-t5.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/bent-s13s14s15-toe-arms-on-the-way-t4.htm Admin For your ultra low S13 chassis' we have had bent toe arms produced. These help clear the subframe and stop traditional straight arms hitting the chassis bolt. These use a unique 1" turnbuckle and 38mm Roll Cage steel properly drawn bent. Our standard 5/8" rod end is featured. Due instock within 4 weeks. Pictures should be up within 1 week, please post up here if you have any interest in them Predicted price is about $410 a pair RRP. We are trying to get this ... Parts In The Making Or In Development Mon, 12 Oct 2009 04:36:27 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/bent-s13s14s15-toe-arms-on-the-way-t4.htm#4 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/bent-s13s14s15-toe-arms-on-the-way-t4.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/who-wants-a-bolt-in-hydro-for-s13-299-t15.htm Admin I have been looking into developing a bolt in hydro that will sit under your stock console for about months now. I finally have 2 test cars to get the specs correct now. I will be developing these regardless, but if I can get some pre orders it will mean I can develop them right now. A rough prediction of $299 should be about right, but prices do vary. This will include the bracket, handle, fasteners, and master cylinder. Kits could be supplied sans master too. I would ... Parts In The Making Or In Development Tue, 20 Oct 2009 00:27:26 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/who-wants-a-bolt-in-hydro-for-s13-299-t15.htm#18 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/who-wants-a-bolt-in-hydro-for-s13-299-t15.htm http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/solid-subframe-risers-for-s13-to-s14-conversion-t14.htm Admin We had always intended to make these, but costs arent cheap. I was disappointed with our preliminary quote, but if there is demand we will produce them. So far cost would be $300 per set, but I will continue to try for better quotes. We will be introducing some new advantages too. The kit will be able to run above or below the subframe. Advantages When run under the frame it raises the subframe by 10mm, correcting the roll center of the car, and giving some better exhaust ... Parts In The Making Or In Development Mon, 19 Oct 2009 23:35:38 GMT http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/solid-subframe-risers-for-s13-to-s14-conversion-t14.htm#17 http://www.cazmanindustries.com/parts-in-the-making-or-in-development-f3/solid-subframe-risers-for-s13-to-s14-conversion-t14.htm http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/soarer-supra-aristo-rear-toe-rods-t13.htm cazman Soarer + Supra + Aristo Rear Toe Rods Models: JZZ30 Soarer (and other soarers/lexus SC300/400) JZS147 Aristo JZA80 Supra $340pair RRP For Rear Toe Arms Introductory price $299pair While we try to keep stock of every item, due to popular demand we are often Nil-stock and some items. We have such a little mark-up we cannot afford to stock hundreds of each item, but that is the price you are paying for quality. I would strongly advise emailing us cazman@internode.on.net ... Suspension Parts For Nissans & Toyotas Tue, 13 Oct 2009 00:04:22 GMT http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/soarer-supra-aristo-rear-toe-rods-t13.htm#13 http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/soarer-supra-aristo-rear-toe-rods-t13.htm http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/soarer-supra-aristo-traction-rods-t12.htm cazman Soarer + Supra + Aristo Traction Rods Models: JZZ30 Soarer (and other soarers/lexus SC300/400) JZS147 Aristo JZA80 Supra $259pair RRP For Rear Traction Arms (can be called strut bars) Introductory price $234pair While we try to keep stock of every item, due to popular demand we are often Nil-stock and some items. We have such a little mark-up we cannot afford to stock hundreds of each item, but that is the price you are paying for quality. I would strongly advise ... Suspension Parts For Nissans & Toyotas Tue, 13 Oct 2009 00:03:00 GMT http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/soarer-supra-aristo-traction-rods-t12.htm#12 http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/soarer-supra-aristo-traction-rods-t12.htm http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/all-nissan-rear-multilink-hub-bearings-t10.htm cazman S13,S14,S15 R32,R33,R34 Inc GTR Multi link Hub bearings $51ea RRP For 1(one) Complete Bearing Introductory price $46ea (no additional discounts) 6 bearings are needed for a Non Hicas equipped car 4 Bearings are needed for a Hicas equipped car We offer a 3 month warranty on this product, and due to the nature of solid mounting the arms. Many users have gotten 5000 Kms from these bearings, but we cannot guarantee anything. We had these specially ... Suspension Parts For Nissans & Toyotas Tue, 13 Oct 2009 00:00:58 GMT http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/all-nissan-rear-multilink-hub-bearings-t10.htm#10 http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/all-nissan-rear-multilink-hub-bearings-t10.htm http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/silvia-skyline-traction-rear-toe-rods-t2.htm cazman S13 S14 S15 R32 R33 R34 Traction & Rear Toe Rods $231pair RRP For Traction Rods (2 lengths are available please specify) Introductory price $205 -10mm to 10mm 10mm to 30mm$245pair RRP For Straight Rear Toe Rods (S13 is different to S14/15 please specify) Introductory price $217 While we try to keep stock of every item, due to popular demand we are often Nil-stock and some items. We have such a little mark-up we cannot afford to stock hundreds of each item, but ... Suspension Parts For Nissans & Toyotas Fri, 09 Oct 2009 03:42:34 GMT http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/silvia-skyline-traction-rear-toe-rods-t2.htm#2 http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/silvia-skyline-traction-rear-toe-rods-t2.htm http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/chromolly-nissan-caster-rods-t1.htm cazman S13 S14 S15 R32 R33 R34 Chromolly Caster Rods $290pair RRP Introductory price $259 While we try to keep stock of every item, due to popular demand we are often Nil-stock and some items. We have such a little mark-up we cannot afford to stock hundreds of each item, but that is the price you are paying for quality. I would strongly advise emailing us cazman@internode.on.net to check stocks. These are a South Australian built item that have to been made to fill a ... Suspension Parts For Nissans & Toyotas Fri, 09 Oct 2009 01:26:07 GMT http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/chromolly-nissan-caster-rods-t1.htm#1 http://www.cazmanindustries.com/suspension-parts-for-nissans-toyotas-f1/chromolly-nissan-caster-rods-t1.htm